The owner had the quarter
panels replaced.

Jon is grinding welds.
 

Jason and Scott are
removing the door skins.

The door skins have
been removed. 

Scott and Jason are applying adhesive to the door frame.

The new skins have
been installed.

Jon is measuring to cut
holes in the apron.

Tyler is fixing a dent
in the fender.

Scott is splicing the
underside of the hood.

Some of the panels are
test-fitted.

Tyler, Brian and Jon are
reshaping the vent with heat.

The students are acid
etching the bare metal.

Jon is spraying epoxy.
 

The first year students are
block sanding.

Jon is trimming.
 

Jon and Scott are adjusting
panels.

We had so much trouble
with this spring we had
Larry look at it.

Mike and Tyler
are removing the
springs.

Jon is sanding the surfacer.

Tyler is masking.

Jon is spraying basecoat.

The basecoat had fisheyes.

The basecoat was sanded, basecoated and clear coated.  The clear coat on the right door and hood was sanded for reclearing.